H3C S6800-54QT IntelliLossless Multi-Rate Data Center Switch

• Customization: Available
• Communication Mode: Full-Duplex & Half-Duplex
• Type: Ethernet Switch
• Model NO.: S6800-54QT
• Transmission Rate: 10/100/1000Mbps
• Ports: ≦8
• Serial console port: 1
• Flash/SDRAM: 1GB/4GB
• Latency: <1μs
• Switching capacity: 1.44Tbps
• Forwarding capacity: 1080Mpps
• Buffer(byte): 16M
• MTBF(year): 46.93
• Warranty: 1 natural year
• Condition: brand-new
• Transport Package: Original New in Box
• Specification: 43.6 × 440 × 400 mm
• Origin: Guangdong, China
• Production Capacity: 100pieces
• Package Size: 46.00cm * 44.00cm * 44.00cm
• Package Gross Weight: 13.000kg

Product Description

Product Description

Flexible port combination

H3C S6800-2/4C support various types of interface cards, realize mixed configuration of high-density 10GE optical and copper port / 40GE / 100GE/MACsec/FC interface.
For S6800-4C, It can support up to 96 10GE ports and 8 40GE ports, or 32 40GE high-speed interfaces.

Data Center-Oriented Features

The switch supports abundant data center features, including:
H3C S6800 series switch supports VXLAN (Virtual eXtensible LAN), which provides two major benefits, higher scalability of Layer 2 segmentation and better utilization of available network paths.
H3C S6800 series switch supports MP-BGP EVPN (Multiprotocol Border Gateway Protocol Ethernet Virtual Private Network) which can run as VXLAN control plane to simplify VXLAN configuration, eliminate traffic flooding and reduce full mesh requirements between VTEPs via the introduction of BGP RR.
H3C S6800 series switch support Fiber Channel over Ethernet (FCoE), which permits storage, data, and computing services to be transmitted on one network, reducing the costs of network construction and maintenance.
H3C S6800-2C/4C switch support Fiber Channel interface card, the ports can be switched to FC port to interoperate with FC SAN.
H3C S6800 series switch support Priority-based Flow Control (PFC), Enhanced Transmission Selection (ETS) and Data Center Bridging eXchange (DCBX). These features ensure low latency and zero packet loss for FC storage and high-speed computing services.
H3C S6800 series switch support TRILL (Transparent Interconnection of Lots of Links). TRILL is an innovative technology that changes the traditional way to build data center networks. By using TRILL technology, S6800 series switch becomes the ideal choice to build a large, high-performance, and scalable cloud data center networks that support live virtual machines.

H3C Distributed Resilient Network Interconnection (DRNI)

H3C S6800 series switch support DRNI, which enables links of multiple switches to aggregate into one to implement device-level link backup. DRNI is applicable to servers dual-homed to a pair of access devices for node redundancy.
Streamlined topology: DRNI simplifies the network topology and spanning tree configuration by virtualizing two physical devices into one logical device.
Independent upgrading: The DR member devices can be upgraded independently one by one to minimize the impact on traffic forwarding.
High availability: The DR system uses a keepalive link to detect multi-active collision to ensure that only one member device forwards traffic after a DR system splits.

RoCE (RDMA over Converged Ethernet)

Remote Direct Memory Access (RDMA) directly transmits the user application data to the storage space of the servers, and uses the network to fast transmit the data from the local system to the storage of the remote system. RDMA eliminates multiple data copying and context switching operations during the transmission process, and reduces the CPU load.
RoCE supports RDMA on standard Ethernet infrastructures. H3C S6800 switch support RoCE and can be used to build a lossless Ethernet network to ensure zero packet loss.
RoCE include the following key features, include PFC(Priority based Flow Control), ECN(Explicit Congestion Notification), DCBX(Data Center Bridging Capability Exchange Protocol), ETS(Enhanced Transmission Selection).

Powerful SDN capacity

H3C S6800 series switch adopt the next-generation chip with more flexible OpenFlow, more resources and accurate ACL matching, which greatly improves the software-defined network (SDN) capabilities and meet the demand of data center SDN network.
H3C S6800 series switch support standard OpenFlow protocol, which can be integrated and managed by H3C VCFC controller or H3C cloud or mainstream cloud platforms or a third-party controller to support flexible network customization and automated management. Users and third-party controllers can use standard interfaces to develop and deploy a dedicated network management strategy for rapid business deployment, functional expansion, and intelligent device management.

MACsec

H3C S6800 series switch supports hardware level encryption technology MACsec (802.1ae), which is an industry-standard security technology that provides secure communication for all traffic on Ethernet links. Compared with traditional application-based software encryption technology, MACsec provides point to-point security on Ethernet links between directly connected nodes and is capable of identifying and preventing most security threats.

Outstanding security control policies

H3C S6800 series switch supports AAA, RADIUS and user account based authentication, IP, MAC, VLAN, port-based user identification, dynamic and static binding; when working with the H3C iMC platform, it can conduct real time management, instant diagnosis and crackdown on illicit network behavior.
H3C S6800 series switch supports enhanced ACL control logic, which enables an enormous amount of inbound and outbound ACL, and delegate VLAN based ACL. This simplifies user deployment process and avoids ACL resource wastage. S6800 switch series can also take advantage of Unicast Reverse Path Forwarding (uRPF). When the device receives a packet, it will perform the reverse check to verify the source address from which the packets are supposedly originated, and will drop the packet if such path doesn't exist. This will curb the increasingly common originating address spoofing.

Flexible choice of airflow

To cope with data center cooling aisle design, the H3C S6800 series switch comes with flexible airflow design, which features bi-cooling aisles in the front and back. Users may also choose the direction of airflow (from front to back or vice versa) by selecting a different fan tray.

Multiple Reliability

H3C S6800 series switch provides multiple reliability protection at both switch and link levels. With overcurrent, overvoltage, and overheat protection, all models have a redundant pluggable power module, which enables flexible configuration of AC or DC power modules based on actual needs. The entire switch supports fault detection and alarm for power supply and fan, allowing fan speed to change to suit different ambient temperatures.

Excellent manageability

H3C S6800 series switch provides a rich management interface, including console, external network and USB. Management protocols such as SNMPv1/v2/v3 are supported aside from iMC Management Console. The network administrator may activate control through CLI, TELNET, SSH, SNMP, RESTful API, which gives maximum flexibility in accessing and managing the device. The administrator may also choose SSH2.0 and SSL encryption to shield the management session.

 

Hardware Specification

Item	S6800-54QT
Dimensions (H × W × D)	44×440×460mm 1.73×17.32×18.11in
Weight	≤13kg (28.66 lb)
Serial console port	1
Out-of-band management port	One GE copper port and one GE fiber port
Mini USB console port	1
USB port	1
QSFP+ port	6
SFP port	-
1/10GBASE-T port	48
Expansion slot	-
CPU	1GHz@2Core
Flash/SDRAM	1GB/4GB
Latency	<1μs
Switching capacity	1.44Tbps
Forwarding capacity	1080Mpps
Buffer(byte)	16M
Related voltage range: 100V to 240V AC, 50/60Hz Maximum voltage range: 90V to 290V AC,
DC-input voltage	Related voltage range: -38.4V to -72V DC
Power module slot	2
Fan tray slot	Five hot-swappable fan
Air flow direction	From front to rear or from rear to front
Static power consumption	Single AC:103W Dual AC:109W Single DC:107W Dual DC:113W
Typical power consumption	Single AC:103W Dual AC:109W Single DC:107W Dual DC:113W
Maximum heat consumption (BTU/hour)	Single AC:351W Dual AC:372W Single DC:365W Dual DC:385W
Operating temperature	0ºC to 45ºC (32°F to 113°F)
Operating humidity	5% to 95%, noncondensing
MTBF(year)	46.93
MTTR(hour)	1

 

Company Profile

About us


SHENZHNE YIBOTE INFORMATION TECHNOLOGY CO.,LTD  - Your Trusted Partner in Network Communications
Established in 2010 and headquartered in Shenzhen, YIBOTE INFORMATION TECHNOLOGY CO., LTD. is a dedicated provider in the IT services market, specializing in the R&D, design, sales, and distribution of core network communications equipment and general accessories.
As distributors and resellers for leading global brands, we offer a comprehensive portfolio including:
Networking Routers & Switches
Firewalls & Security Appliances
Servers & Storage Solutions
IP Phones & Video Conferencing Systems
Wireless Access Points (APs)
Power Distribution Units (PDUs)
Modules & Associated Components
Our Commitment to Excellence:
Leveraging our experienced and skilled team in Shenzhen (with its excellent transportation links), we deliver high-quality products, effective solutions, and responsive service. We pride ourselves on:
Stable Supply & Reliable Delivery: Consistent product availability and dependable shipping.
Competitive Pricing: Cost-effective solutions without compromising quality.
Timely Support: Proactive assistance from order to post-sale.
Custom Solutions: Welcoming OEM and ODM project collaborations.
Global Reach:
Our products and solutions serve customers worldwide, with significant exports to the Middle East, Africa, the Americas, Europe, and Asia.
Partner With Us:
Whether sourcing from our extensive inventory or seeking engineering support for your project bid, our dedicated business team is ready to assist. Our service commitment begins the moment we receive your order, extending far beyond the invoice.
We warmly welcome customer visits and business negotiations. Let's collaborate for mutual success and growth.


Why us

FAQ

Q1:Who we are?
We specialized in IT products and Solutions for more than 16 years in China. 
Q2: What are your main products? 
Our main supply network routers, network switches,network firewalls,Wireless access point,network firewall,Unified communications,Networking accessories,Servers,Storages,Optical Access network,Video Surveillance ,Consumer and office equipment.
Q3:Does your company sell used IT hardware ?
We carry both new and used hardware from various manufacturers . we agent of many famous brand ,Additionally,We get all of our used equipment from working environments. Most of our inventory comes from companies and organizations that are liquidating their assets either because of a bankruptcy, downsizing or perhaps they are upgrading. 
Q4: How can I order from your company?
You can easily place orders.We accept your orders by phone, email, WhatsApp and WeChat . 
Q5: How soon will my order be shipped?
1-3 working days for in-stock items and ex-stock items will be 4-6 weeks. 
Q6: What shipping carriers does your company use, and how may I contact them?
Our company uses several different shippers depending on the size and weights of the items. Most products ship via FedEx ,DHL or UPS . Please visit the shippers' websites for additional contact information.
Q7: What type of warranty that your company provide?
Buy with confidence! We place our faith in our quality, so much that we offer a FREE one-year warranty on new hardware purchases.Warranties can also be extended for two or three years for an additional fee. And offer 90days warranty on used hardware purchase.