| Communication Mode: | Full-Duplex & Half-Duplex |
|---|---|
| Type: | Ethernet Switch |
| Transmission Rate: | 10/100/1000Mbps |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Cisco® Catalyst® 9115 Series Wi-Fi 6 Access Points are the next generation of enterprise access points. They are resilient, secure, and intelligent. C9120AXI-H is the Cisco Catalyst 9120AX Access Point, internal antennas; Wi-Fi 6; 4x4:4 MIMO, H Domain.
Quick Specs
Figure 1 shows the appearance of the C9120AXI-H .
Cisco AP 9120 series provides these features:
- 802.11ax (Wi-Fi 6)
- Cisco RF ASIC
- Uplink/downlink OFDMA
- MU-MIMO technology
- Target wake time
- BSS coloring
- Intelligent Capture
- Flexible Radio Assignment
- Dual 5-GHz radio support
- Smart antenna connector
- Cisco Mobility Express
- Multigigabit Ethernet support
- Bluetooth 5.0
- Container support for applications
- Apple Features
Table 1 shows the Quick Spec.
|
Product Code |
C9120AXI-H |
| Description |
Cisco Catalyst 9120AX Access Point, internal antennas; Wi-Fi 6; 4x4:4 MIMO, H Domain |
| Software |
· Cisco Unified Wireless Network Software Release 8.9.x or later; · Cisco IOS ® XE Software Release 16.11 with AP Device Pack, or later |
| Supported wireless LAN controllers |
· Cisco Catalyst 9800 Series Wireless Controllers · Cisco 3500, 5520, and 8540 Series Wireless Controllers and Cisco Virtual Wireless Controller |
| 802.11n version 2.0 (and related) capabilities |
· 4x4 MIMO with four spatial streams · Maximal Ratio Combining (MRC) · 802.11n and 802.11a/g beamforming · 20- and 40-MHz channels · PHY data rates up to 890 Mbps (40 MHz with 5 GHz and 20 MHz with 2.4 GHz) · Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive) · 802.11 Dynamic Frequency Selection (DFS) · Cyclic Shift Diversity (CSD) support |
| 802.11ac |
· 4x4 downlink MU-MIMO with four spatial streams MRC · 802.11ac beamforming · 20-, 40-, 80-, and 160-MHz channels · PHY data rates up to 3.47 Gbps (160 MHz with 5 GHz) · Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive) · 802.11 DFS · CSD suppor |
| 802.11ax |
· 4x4 downlink MU-MIMO with four spatial streams · Uplink/downlink OFDMA · TWT · BSS coloring · MRC · 802.11ax beamforming · 20-, 40-, 80-, and 160-MHz channels · PHY data rates up to 5.38 Gbps (160 MHz with 5 GHz and 20 MHz with 2.4 GHz) · Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive) · 802.11 DFS · CSD support |
| Integrated antenna |
Flexible radio (either on 2.4GHz or on 5GHz) · 2.4 GHz, peak gain 4 dBi, internal antenna, omnidirectional in azimuth · 5 GHz, peak gain 5 dBi, internal antenna, omnidirectional in azimuth Dedicated 5GHz radio · 5 GHz, peak gain 4 dBi, internal antenna, omnidirectional in azimuth |
| External antenna (sold separately) |
· Cisco Catalyst 9120E Access Points are certified for use with antenna gains up to 6 dBi (2.4 GHz and 5 GHz) · Cisco Catalyst 9120P Access Points) are certified for use with antenna gains up to 13 dBi (2.4 GHz and 5 GHz) with the AIR-ANT2513-P4M-N= antenna · Cisco offers the industry's broadest selection of antennas, delivering optimal coverage for a variety of deployment scenarios · Supports Self-Identifiable Antennas (SIA) on one RP-TNC port |
| Smart Antenna Connector |
· Available on the 9120E and on the 9120P only · Compact multi RF connector with DART interface · Requires the AIR-CAB002-DART-R= 2 ft smart antenna connector when used with antennas with RP-TNC connector · Required when running the flexible radio as either a second 5-GHz serving radio or a Wireless Security Monitoring radio |
| Input power requirements |
· 802.3at Power over Ethernet Plus (PoE+), 802.3bt Cisco Universal PoE (Cisco UPOE+, Cisco UPOE ®) · Cisco power injector, AIR-PWRINJ6= · 802.3af PoE · Cisco power injector, AIR-PWRINJ5= (Note: This injector supports only 802.3af) |
| System memory |
· 2048 MB DRAM · 1024 MB flash |
){kind=link}