Cisco IE-1000-6T2T-LM Industrial Eth 8x FE Cooper Port Managed Switch

• Customization: Available
• Communication Mode: Full-Duplex & Half-Duplex
• Type: Ethernet Switch
• Model NO.: IE-1000-6T2T-LM
• Transmission Rate: 10/100Mbps
• Ports: ≦8
• Installed Size: 128 MB
• Compatibility: PC
• Manufacturer: Cisco
• Packaged Quantity: 1
• Product Line: Cisco Catalyst
• Model: IE-1000-6T2T-LM
• port Qty: 8 Ports
• Comments: PoE
• Connector Type: RJ-45
• Authentication Method: RADIUS, TACACS+
• MTBF: 381, 000 hours
• Color Category: Gray
• Jumbo Frame Support: 9018 bytes
• PoE Budget: 370 W
• PoE Power: 15.4 W
• Transport Package: Original
• Specification: 4.45 x 44.5 x 35.6 cm
• Trademark: CISCO
• Origin: China
• HS Code: 8517623290
• Production Capacity: 300

Product Description

Product description

IE-1000-6T2T-LM Overview

The Cisco Industrial Ethernet (IE) 1000 Series Switches are compact rugged switches aimed at operational technology (OT) users with limited IT network knowledge. The IE 1000 Series Switches provide an easy transformation from the legacy factory to digital solution. For machine builders and machine-to-machine (M2M) solutions, it is an attractive entry level product as a GUI-based, lightly-managed switch. The IE 1000 is a good fit for locations with harsh temperatures and small spaces and is Power over Ethernet (PoE) capable with zero IT management.

Quick Specs

Table 1 shows the Quick Specs.

Product Code	IE-1000-6T2T-LM
Forwarding Bandwidth	Max:2.8Gbps
Switching Bandwidth	Max:5.6Gbps
Hardware	DRAM: 128 MB DDR2 without ECC Onboard flash memory: 160 MB
Alarm	Alarm I/O: output connector on top panel of 4P2S and 8P2S, 1.0A@24VDC or 0.5A@48VDC
Power consumption	4.2W
Connectors and cabling	100BASE-FX MMF (2 km)TBD with engineer input 10/100/1000BASE-T ports: RJ-45 connectors, 4-pair Category 5 UTP cabling
Dimensions (H x W x D)including DIN rail	5.0H x 1.5W x 4.5D (127mm H x 38mm W x 115mm D)

Product Details

Cisco Industrial Ethernet 1000Seriesprovides these features:

Scalability: Four models are available supporting 5, 6, 8 and 10 Ethernet ports, with Fast Ethernet (FE) and Gigabit Ethernet (GE), copper and fiber uplinks options

Easy integration:Zero-touch IP discovery or Dynamic Host Configuration Protocol (DHCP)IP addressing and simple web GUI-based management

PnP (Plug and Play): Automates the process of provisioning the new devices in to the network by applying configurations, installing required image without manual intervention.

Fast startup time: Starts 30 seconds from cold boot

Manageability: Web GUI interface, and diagnostics and analysis options through Simple Network Management Protocol (SNMP) and syslog

Security:secure access; port-security; TACACS+ and RADIUS AAA Client: Security protocols to control access into networks;

IEEE 802.1x security:Provides an authentication mechanism to devices wishing to attach to the network. Single host mode with MAC authentication bypass.

Minimize data load:VLAN aware, Internet Group Management Protocol (IGMP) and DHCP snooping to filter unwanted data

Lightly-managed:Spanning-tree protocol (STP), Link Layer Discovery Protocol (LLDP), Cisco Discovery Protocol aware

Sticky-MAC:Enables the IE1K to retain MAC addresses it dynamically learns and avoid new devices to connect on the port

BootP server with per-port support: When client sends a BootP request, the server responds with BootP response based on same DHCP pool configuration.

Gigabit uplink:Two fiber-optic SFP based uplink for up to 50 miles (80 kilometers) links

Industrial PoE:Up to eight PoE (IEEE 802.af) and PoE+ (802.3at) supported on selected models

Redundant voltage feeds, alarm relays support and DIN rail mount

Industrial environmental compliance and certifications: Ethernet/IP (CIP) Product

The Accessories

Table 2 shows Power Supplies and Mounting Kit Available for Cisco IE 1000 Series Switches.

Product Number	Wattage	Rated nominal input operating range	PoE/PoE+ support
PWR-IE50W-AC=	50W	AC 100-240V/1.25A 50-60Hzor DC 125-250V/1.25A	No
PWR-IE65W-PC-AC=	65W	AC 100-240V/1.4A 50-60Hzor DC 125-250V/1.0A	Yes
PWR-IE65W-PC-DC=	65W	DC 24-48VDC/4.5A	Yes
PWR-IE170W-PC-AC=	170W	AC 100-240V/2.3A 50-60Hzor DC 125-250V/2.1A	Yes
PWR-IE170W-PC-DC=	170W	DC 12-54VDC/2.3A	Yes
STK-RACK-DINRAIL=	19 in. DIN Rail mount kit	\	\

Compare to Similar Items

Table 3shows the comparison.

Product Code	IE-1000-4T1T-LM	IE-1000-6T2T-LM	IE-1000-4P2S-LM	IE-1000-8P2S-LM
Total Ports	5	8	6	10
Fast Ethernet Copper Uplink	1	2	\	\
GE SFP Uplink	\	\	2	2
Fast Ethernet Copper Downlink	4	6	\	\
PoE/PoE+	\	\	4	8
Input Power Voltage	12-24V	12-24V	48-54V	48-54V
Power consumption	4.2W	5.3W	without PoE 8.6W, with PoE 72-140.4W	without PoE 10.6W, with PoE 134.4-205.2W
Dimensions (H x W x D)including DIN rail	5.0H x 1.50W x 4.5D (127mm H x 38mm W x 115mm D)	5.0H x 1.8W x 4.5D (127mm H x 45.7mm W x 115mm D)	5.0H x 1.8W x 5.3D (127mm H x 45.7mmW x 134mm D)	5.0H x 1.8W x 5.3D (127mm H x 45.7mmW x 134mm D)

IE-1000-6T2T-LM Specification

IE-1000-6T2T-LM Specification
Forwarding Bandwidth	• Max:2.8Gbps
Switching Bandwidth	• Max:5.6Gbps
Hardware	• DRAM: 128 MB DDR2 without ECC • Onboard flash memory: 160 MB
Alarm	• Alarm I/O: output connector on top panel of 4P2S and 8P2S, 1.0A@24VDC or 0.5A@48VDC
Power consumption	5.3W
Connectors and cabling	• 100BASE-FX MMF (2 km)-TBD with engineer input • 10/100/1000BASE-T ports: RJ-45 connectors, 4-pair Category 5 UTP cabling
Dimensions (H x W x D)including DIN rail	5.0"H x 1.8"W x 4.5"D (127mm H x 45.7mm W x 115mm D)
Software features	LLDP, Cisco CDP aware, MSTP, STP Portfast, ICMP Vlans, static IP, Trust Ingress DSCP, COS, Priority Port, port - security, IGMP querier, DHCP server SNMP v2/v3, SNMP traps, syslog, IGMP snooping, DHCP snooping, BPDU guard, Etherchannel, Alarms, PoE capability, Smartport Macro, SPAN/Port Mirroring, Strom Control, EtherNet/IP (EDS)
Safety Certifications	• UL/CSA 60950-1 • EN 60950-1 • CB to IEC 60950-1 (with country deviations) • NOM to NOM-019-SCF1 (through partners and distributors) • UL/CSA/IEC/EN 61010-2-201 • CE Marking
Hazardous Locations	• ANSI/ISA 12.12.01 (Class1, Div2 A-D) • EN 60079-0, -15 ATEX certificate (Class 1, Zone2 A-D) • IEC 60079-0, 15 (report only) • UL 60079-0, 15 • CAN/CSA C22.2 No. 60079-0, -15 * Cabinet enclosure required
EMC Emissions and Immunity Compliance	• FCC 47 CFR Part 15 Class A • EN 55022/CISPR 22 Class A • EN 55016-1-1, -1-4, -2-3 Class AVCCI Class A • RoHS compliance • AS/NZS CISPR 22 Class A, AS/NZS CISPR 24 • CISPR11 Class A, CISPR22 Class A • ICES 003 Class A • KCC Marking (Korea) • CE Marking • RCM Marking (Australia/New Zealand) • EAC Marking (Eurasian Conformity) • Anatel (Brazil) • China NAL • IEC/EN/EN61000-4-2 (Electro Static Discharge), 8kV air/6kV contact • IEC/EN 61000-4-3 (Radiated Immunity, 10 V/m 80-2000MHz, 3V/m 2000-2700MHz) • IEC/EN 61000-4-4 (Fast Transients - 2kV DC power, 2kV data line, 4kv earth) • IEC/EN 61000-4-5 (Surge 2 kV/1 kV DC power, 2 kV shielded and unshielded data line) • IEC/EN 61000-4-6 (Conducted Immunity, 10 V/emf 0.15-80MHz) • IEC/EN 61000-4-8 (Power Frequency Magnetic Field Immunity 30A/m 60 sec, 300A/m 3 sec) • IEC/EN 61000-4-9 (Pulse Magnetic Field Immunity 300A/m) • IEC/EN 61000-4-29 (Voltage Dips Immunity)
Shock and Vibration	• IEC 60068-2-27 (Operational Shock: 30G 11ms, half sine) • IEC 60068-2-27 (Non-Operational Shock 65-80G, trapezoidal) • IEC 60068-2-6, IEC 60068-2-64 (Operational Vibration) • EC 60068-2-6, IEC 60068-2-64, IEC 60068-2-47 (Non-operational Vibration)
Industry Standard	• IEC/EN 61000-6-1 (Immunity for Light Industrial Environments) • IEC/EN 61000-6-2 (Immunity for Industrial Environments) • IEC/EN 61000-6-4 (Emissions for Industrial Environments) • EN 61131-2 (PLC Zone A & B, EMC/EMI, environmental, mechanical) • EN61326-1 (Industrial Controls) • Marine -TAC (Temp-A, Humid-B, Vib-A, EMC-A, Enc-A) • EN 50581 (RoHS) • China RoHS • EU WEEE • NEMA TS-2 (EMC, environmental, mechanical) • IP30
Humidity	• IEC 60068 -2-3 • IEC 60068-2-30 (Test Db) • Relative humidity: 5% to 95% non-condensing
Operating Temperature	• -20 °C to 70 °C (vented enclosure operating) • -20 °C to 60 °C (sealed enclosure operating) • -16 °C to 75 °C (fan or blower-equipped enclosure operating)•Operational altitude: Up to 13.8k ft • IEC 60068-2-1 • IEC 60068-2-2 • IEC 60068-2-56 • -40 C to +85 C (storage temperature) • IEC 60068-2-14 (Test Nb) • Storage altitude: Up to 15,000 ft
Mean Time Between Failure (MTBF)	• Meantime between failure: 374,052 hours (42.7 years)
Warranty	• Five-year limited warranty on all IE-1000 hardware PIDs and all IE power supplies defined in Table 2 previously. See the following link for details on warranty

 

 

 

About US

 

 

SHENZHNE YIBOTE INFORMATION TECHNOLOGY CO.,LTD  - Your Trusted Partner in Network Communications

 

Established in 2010 and headquartered in Shenzhen, HELPYOU GROUP CO., LTD. is a dedicated provider in the IT services market, specializing in the R&D, design, sales, and distribution of core network communications equipment and general accessories.

 

As distributors and resellers for leading global brands, we offer a comprehensive portfolio including:

 

Networking Routers & Switches

Firewalls & Security Appliances

Servers & Storage Solutions

IP Phones & Video Conferencing Systems

Wireless Access Points (APs)

Power Distribution Units (PDUs)

Modules & Associated Components

 

Our Commitment to Excellence:

 

Leveraging our experienced and skilled team in Shenzhen (with its excellent transportation links), we deliver high-quality products, effective solutions, and responsive service. We pride ourselves on:

Stable Supply & Reliable Delivery: Consistent product availability and dependable shipping.

Competitive Pricing: Cost-effective solutions without compromising quality.

Timely Support: Proactive assistance from order to post-sale.

Custom Solutions: Welcoming OEM and ODM project collaborations.

Global Reach:
Our products and solutions serve customers worldwide, with significant exports to the Middle East, Africa, the Americas, Europe, and Asia.

 

Partner With Us:

 

Whether sourcing from our extensive inventory or seeking engineering support for your project bid, our dedicated business team is ready to assist. Our service commitment begins the moment we receive your order, extending far beyond the invoice.

 

We warmly welcome customer visits and business negotiations. Let's collaborate for mutual success and growth.

 

 

 

Why US

 

 

 

 

FAQ

 

 

Q1:Who we are?

 

We specialized in IT products and Solutions for more than 16 years in China. 

 

Q2: What are your main products? 

 

Our main supply network routers, network switches,network firewalls,Wireless access point,network firewall,Unified communications,Networking accessories,Servers,Storages,Optical Access network,Video Surveillance ,Consumer and office equipment.

 

Q3:Does your company sell used IT hardware ?

 

We carry both new and used hardware from various manufacturers . we agent of many famous brand ,Additionally,We get all of our used equipment from working environments. Most of our inventory comes from companies and organizations that are liquidating their assets either because of a bankruptcy, downsizing or perhaps they are upgrading. 

 

Q4: How can I order from your company?

 

You can easily place orders.We accept your orders by phone, email, WhatsApp and WeChat . 

 

Q5: How soon will my order be shipped?

 

1-3 working days for in-stock items and ex-stock items will be 4-6 weeks. 

 

Q6: What shipping carriers does your company use, and how may I contact them?

 

Our company uses several different shippers depending on the size and weights of the items. Most products ship via FedEx ,DHL or UPS . Please visit the shippers' websites for additional contact information.

 

Q7: What type of warranty that your company provide?

 

Buy with confidence! We place our faith in our quality, so much that we offer a FREE one-year warranty on new hardware purchases.Warranties can also be extended for two or three years for an additional fee. And offer 90days warranty on used hardware purchase.